Drives for sliding gates

(67 products)
Posuvne

Choosing the Right Drive for a Sliding Gate

Electromechanical drives are the most common choice for sliding gates in residential and commercial properties. These drives are reliable, durable, and offer excellent value for money. Electromechanical drives are categorized by their power supply into AC (alternating current) and DC (direct current) motors, each with its own specific advantages and application areas.

Types of Electromechanical Drives:

1. Drives with AC Power Supply

AC drives use alternating current and are known for their stability and high torque. Thanks to the higher torque, they can effectively drive heavier gates, ensuring reliable operation even under demanding conditions.

  • Advantages: High torque, ideal for heavy and large gates, long lifespan.
  • Application: Suitable for commercial properties or gates with high weight where continuous and intensive operation is required.

2. Drives with DC Power Supply

DC drives use direct current, allowing them to operate efficiently with lower energy consumption and less heat generation. As a result, they can handle a higher number of opening and closing cycles, which is ideal for gates with high usage frequency.

  • Advantages: Low energy consumption, less heat generation, ability to handle a higher number of cycles, quiet operation.
  • Application: Suitable for residential gates or gates with higher usage frequency, where efficient and quiet operation is needed.

What to Consider When Choosing a Drive for Sliding Gates

Choosing the right drive for your sliding gate depends on several key factors:

  • Type of Gate: It’s important to consider whether it’s a cantilever gate or a rolling gate. Cantilever gates require a more powerful drive since they must overcome their own weight without support, while rolling gates are usually less demanding on the drive.
  • Wing Weight: The drive must be strong enough to handle the weight of your gate. For heavier gates, AC drives are more suitable, offering higher torque.
  • Wing Length: Longer gates require a stronger motor and may need a drive with higher power to ensure smooth movement.
  • Usage Intensity: If the gate is used frequently, such as in commercial or residential complexes, DC drives can be advantageous due to their lower heat generation and ability to handle a higher number of cycles.
  • Location of the Gate: Consider whether the gate is on flat ground or on a slope. Gates installed on a slope require a more powerful drive that can overcome gravitational resistance during opening or closing.

Take Advantage of Our Product Filtering System

On our website, you will find a wide range of drives for sliding gates. To find the right drive for your gate, we recommend using our clear filtering system. With the filters, you can easily select a drive based on the type of power supply, performance, wing weight, and other parameters. If you need further assistance with your selection, don’t hesitate to contact us.


  • ROLLKIT motor for sliding gate do 400kg DRIFT-40-SMART

    Mark
    Rollkit
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    200kg
    Required products
    €268,83
    without VAT
    €322,60 with VAT
    In stock (210 units)
    PCS
    Required products
    Part of set
    Sets

    ROLLKIT automation for sliding gates, kit, max 400 DRIFT40-SMART-ZKIT

    Mark
    Rollkit
    Recommended weight of the wing
    200kg
    Drive slowdown
    Drive decelerate before endpoint
    €297,88
    without VAT
    €357,46 with VAT
    In stock (168 units)
    SET

    ROLLKIT automation for sliding gates, kit, max 400 DRIFT40-SECURITY-ZKIT

    Mark
    Rollkit
    Recommended weight of the wing
    200kg
    Drive slowdown
    Drive decelerate before endpoint
    €389,56
    without VAT
    €467,47 with VAT
    Very low stock (3 units)
    SET

    Remote controller for TURN, DRIFT rolling code, 4C TR1-434

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
    Required products
    €8,35
    without VAT
    €10,02 with VAT
    In stock (505 units)
    PCS

    Cables for connecting backup batteries for Drift40/80 CB-BT-CHP

    Mark
    Rollkit
    Required products
    €4,98
    without VAT
    €5,98 with VAT
    Low stock (14 units)
    PCS

    Battery fixation kit for DRIFT BAT-HOLD

    Mark
    Rollkit
    Required products
    €4,98
    without VAT
    €5,98 with VAT
    In stock (76 units)
    PCS

    ROLLKIT electronics with receiver for DRIFT 80 CUD-3S/80

    1 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Wifi connection
    Yes

    Remote controller for TURN, DRIFT rolling code, 4C TR2-434

    2 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
  • Set of propulsion for sliding gate set, max 400kg RBS400BDKCE

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    €506,65
    without VAT
    €607,98 with VAT
    In stock (329 units)
    PCS
    Part of set

    Non-reversible electromechanical drive RBS400

    1 pcs
    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4

    NICE MYGO four-channel remote control MYGO4

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44

    LED flashlight with integrated antenna 12 - 24V ELDC

    1 pcs
    Mark
    Nice
  • Braking Device for Gate Module 4 BSFM-30

    Mark
    Rollkit
    €355,39
    without VAT
    €426,47 with VAT
    Very low stock (7 units)
    PCS
  • Automatic motor with electronics 2000kg BKV20AGE

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    €859,49
    without VAT
    €1.031,39 with VAT
    Low stock (17 units)
    PCS
    Part of set
    Sets

    Automatic motor with electronics 2000kg BKV20AGE

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    €859,49
    without VAT
    €1.031,39 with VAT
    Low stock (17 units)
    PCS

    Automatic motor with electronics 2000kg BKV20AGE

    1 pcs
    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4

    Electronics for Came BKV ZN-8

    1 pcs
    Mark
    Came
    Drive slowdown
    Drive decelerate before endpoint
  • NICE drive for sliding gates, set, max 2500kg RUN2500-ZKIT

    Mark
    Nice
    Max. wing length
    18m
    Module of the gear comb
    mod 4
    €977,18
    without VAT
    €1.172,62 with VAT
    Low stock (16 units)
    SET
    Part of set

    Auto. motor do 2500 kg RUN-2500

    1 pcs
    Mark
    Nice
    Recommended weight of the wing
    1250kg
    Drive slowdown
    Drive decelerate before endpoint

    Receiver 4- canals NICE ONE OXIBD

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44
  • NICE gate actuator max 600kg ROBO-600

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    €384,55
    without VAT
    €461,46 with VAT
    In stock (711 units)
    PCS
    Part of set
    Sets

    NICE gate actuator max 600kg ROBO-600-ZKIT

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    €433,58
    without VAT
    €520,30 with VAT
    In stock (711 units)
    SET

    Control unit for ROX-600 ROA41

    1 pcs
    Mark
    Nice
    Drive slowdown
    Drive decelerate before endpoint
    Frequency (MHz)
    433

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • CAME actuator for leaf gates set, max 800kg, BX-STRONG-AGM-ZKIT

    Mark
    Came
    Max. wing length
    4m
    Module of the gear comb
    mod 4
    €443,24
    without VAT
    €531,89 with VAT
    In stock (65 units)
    PCS
    Part of set

    Electronics for sliding gates - extended functions ZBX-7N

    1 pcs
    Mark
    Came

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP roling code, 4CH, CAME TOP44RBN

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME actuator for leaf gates set, max 800kg, BX-STRONG-AGS-ZKIT

    Mark
    Came
    Max. wing length
    4m
    Module of the gear comb
    mod 4
    Required products
    €490,25
    without VAT
    €588,30 with VAT
    In stock (254 units)
    PCS
    Alternatives
    Required products
    Part of set

    ROLLKIT automation for sliding gates up to 800kg DRIFT-80-SMART

    Mark
    Rollkit
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    €337,16
    without VAT
    €404,59 with VAT
    In stock (169 units)
    PCS

    Automatic motor with BLUEBUS electronics do 1000kg ROBUS-1000

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    Required products
    €555,19
    without VAT
    €666,23 with VAT
    In stock (267 units)
    PCS

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €47,79
    without VAT
    €57,35 with VAT
    In stock (389 units)
    PCS

    Electronics for sliding gates - extended functions ZBX-7N

    1 pcs
    Mark
    Came

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP roling code, 4CH, CAME TOP44RBN

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME automation for sliding gates, set, max 400kg BXV-4-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    €430,31
    without VAT
    €516,37 with VAT
    In stock (75 units)
    PCS
    Alternatives
    Required products
    Part of set
    Sets

    Full NICE system for sliding gates max 400kg ROAD-400

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    €329,06
    without VAT
    €394,87 with VAT
    In stock (452 units)
    PCS

    Aluminium Self-Supporting Sliding Gate 6x2.125m with Rectangular Infill 20x100 Anthracite R7016, without Tensioner, with FG/S-CLG-R7016-GA-SET-ECO

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Anthracite
    €2.912,41
    without VAT
    €3.494,89 with VAT
    Low stock (11 units)
    SET

    Aluminum Cantilever Sliding Gate 6x2.125m with Rectangular Infill 20x100, Anthracite R7016, with Tensioner and Drive - S FG/S-CLG-R7016-GA-SET-PRO

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    €2.881,69
    without VAT
    €3.458,03 with VAT
    Low stock (11 units)
    SET

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €47,79
    without VAT
    €57,35 with VAT
    In stock (389 units)
    PCS

    Electronics for BXV drives ZN-7

    1 pcs
    Mark
    Came

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP roling code, 4CH, CAME TOP44RBN

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • NICE automation max 1500kg THOR-1500

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    €480,94
    without VAT
    €577,13 with VAT
    In stock (63 units)
    PCS
    Part of set
    Sets

    NICE automation for sliding gates, set, max 1500kg THOR1500-ZKIT

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    €526,34
    without VAT
    €631,61 with VAT
    In stock (63 units)
    SET

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • Automatic motor with BLUEBUS electronics do 1000kg ROBUS-1000

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    Required products
    €555,19
    without VAT
    €666,23 with VAT
    In stock (267 units)
    PCS
    Alternatives
    Required products
    Part of set
    Sets

    CAME automation for sliding gates, set, max 1000kg BXV-10-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    €610,54
    without VAT
    €732,65 with VAT
    In stock (75 units)
    PCS

    NICE actuator for sliding gates ROBUS1000-ZKIT

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    €677,64
    without VAT
    €813,17 with VAT
    In stock (265 units)
    SET

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €47,79
    without VAT
    €57,35 with VAT
    In stock (389 units)
    PCS

    Control unit for ROBUS400/600/1000 RBA3R10

    1 pcs
    Mark
    Nice
  • Universal stand for sliding gate drives H/UNI-SET

    Material
    Steel
    Surface finish
    Galvanized
    Out of stock
    €0,00
    without VAT
    €0,00 with VAT
    Backordered
    PCS
  • NICE automation for sliding gates, max 1000kg ROBO-1000

    Mark
    Nice
    Module of the gear comb
    mod 4
    Frequency (MHz)
    433
    €510,30
    without VAT
    €612,36 with VAT
    In stock (50 units)
    PCS
    Part of set

    Double-channel remote controller NICE FLO2R rollin INTI2

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • CAME automation for sliding gates, set, max 800kg BKX-8-AGF-KKIT

    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    €752,19
    without VAT
    €902,63 with VAT
    Low stock (13 units)
    SET
    Part of set

    CAME automation for sliding gates, max 800kg BKX08AGF

    1 pcs
    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54

    Remote controller CAME TOP roling code, 4CH, CAME TOP44RBN

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Rolling

    RGB LED warning beacon with built-in antenna, CXN bus, adjustable color KRX1B1RW

    1 pcs
    Material
    Polycarbonate
    Mark
    Came
    Frequency (MHz)
    Multi (433/868)
  • CAME automation for sliding gates, max 800kg BKX08AGF

    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    €591,95
    without VAT
    €710,34 with VAT
    Low stock (19 units)
    PCS
    Sets

    CAME automation for sliding gates, set, max 800kg BKX-8-AGF-KKIT

    Mark
    Came
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    €752,19
    without VAT
    €902,63 with VAT
    Low stock (13 units)
    SET