Assemblies

(651 products)

  • Sliding gate drive KEY set, max 800kg TURBO-S-800

    Mark
    Key
    Max. wing length
    7m
    Module of the gear comb
    mod 4
    €431,94
    without VAT
    €518,33 with VAT
    In stock (47 units)
    PCS
    Part of set
    Control unit for sliding gate 24V
    Sold out

    Control unit for sliding gate 24V CT-10324

    1 pcs
    Transmitter rolling code, 4CH, 433,92MHz
    Sold out

    Transmitter rolling code, 4CH, 433,92MHz SUB-44R

    2 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage do 30m FT-23

    1 pcs
    Mark
    Key
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • Sliding gate drive KEY set, max 600kg TURBO-S-600

    Mark
    Key
    Max. wing length
    6m
    Module of the gear comb
    mod 4
    €373,25
    without VAT
    €447,90 with VAT
    In stock (25 units)
    PCS
    Part of set
    Control unit for sliding gate 24V
    Sold out

    Control unit for sliding gate 24V CT-10324

    1 pcs
    Transmitter rolling code, 4CH, 433,92MHz
    Sold out

    Transmitter rolling code, 4CH, 433,92MHz SUB-44R

    2 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage do 30m FT-23

    1 pcs
    Mark
    Key
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • Sold out

    Oak dowel, top anchoring D50 WD-VER-VR100

    Material
    Wood Oak - CINK
    Surface finish
    Raw
    Hole
    without hole
    Sold out
    €0,00
    without VAT
    €0,00 with VAT
    PCS
    Part of set
    Wooden handle - BEECH, FINGER-JOINTED
    Sale

    Wooden handle - BEECH, FINGER-JOINTED WB/D50-L3000-CINK

    1 pcs
    Material
    Wood Beech - CINK
    Surface finish
    Raw
    L
    3000

    Upper anchoring - wooden pole A6/80x5-M16

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Post
    D50 - wood

    Round base cover A/0512-050

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Anchoring
    Top
  • Nice drive for a double-leaf gate, set with photocells TOO3024-ZKIT

    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    150kg
    €537,48
    without VAT
    €644,98 with VAT
    Low stock (10 units)
    SET
    Part of set

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • Complete system NICE - garage doors with guide kit SPIDER32BLBDWKCE

    Mark
    Nice
    Surface of gate
    16,9 m2
    Frequency (MHz)
    433
    €546,75
    without VAT
    €656,10 with VAT
    Low stock (10 units)
    SET
    Part of set

    Garage drive Nice without track max 16,9 m2 SPIDER1200BLW

    1 pcs
    Mark
    Nice
    Surface of gate
    16,9 m2
    Frequency (MHz)
    433

    Belt track for SPIDO garage door opener length 3 m SR32B

    1 pcs
    Mark
    Nice
  • Fittings for sliding doors folding doors 3m GS-AL/P2000-4/N/E-set

    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    10-12
    €1.015,84
    without VAT
    €1.219,01 with VAT
    Low stock (10 units)
    PCS
    Part of set

    Aluminum profile GS-AL/P2000-4/N/E GS-AL/P2000-4

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized

    Aluminum profile GS-AL/PA2000/N/E

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000

    Aluminum profile GS-AL/PB2000/N/E

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000

    Aluminum profile AL GS-AL/K2000/N/E

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
  • Cantilever sliding gate set SV-136x142-ECO SV-136x142-ECO

    Material
    Steel
    Surface finish
    Galvanized
    €0,00
    without VAT
    €0,00 with VAT
    Low stock (19 units)
    SET
    Part of set

    Cantilever gate carriage Zn, profile 136x142mm H/34B-4-136x142

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Guide wheel Zn, profile 136x142, L165mm H/14N-136x142

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Cantilever Gate End Stop Zn, profile 136x142mm H/15P-145

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    End cap Zn, profile 136x142mm H/40-136x142P

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
  • Cantilever gate set up to 8m Zn, 94x85mm SV-94x85Zn heavy

    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    €912,90
    without VAT
    €1.095,48 with VAT
    In stock (101 units)
    SET
    Alternatives
    Part of set

    Cantilever gate set up to 8m Fe, 94x85mm SV-94x85 heavy

    Material
    Steel
    Surface finish
    Raw
    Mark
    Umakov
    €825,43
    without VAT
    €990,52 with VAT
    In stock (74 units)
    SET

    Guiding track Zn, 94x85x5mm, for cantilever gate H/02-94x85-Zn-6000

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products

    Double cantilever gate carriage Zn, profile 94x85m H/34B-8-94x85-HEAVY

    2 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
    Required products

    Guide wheel Zn, profile 94x85mm H/14N-94x85

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    Cantilever Gate End Stop Zn, profile 94x85, 90x95mm H/15P-100

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov

    End cap Zn, profile 94x85mm H/40-94x85P

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Mark
    Umakov
  • Green facade type I A/M8-003-800v1600

    Material
    Stainless steel AISI 304
    €28,43
    without VAT
    €34,12 with VAT
    In stock (323 units)
    PCS
    Part of set

    Stainless steel cable - exterior A14/7900-003

    6 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Raw
    Filling
    Cable
    Required products

    Cap for cable A19/003

    10 pcs
    Material
    Rubber
    Surface finish
    Raw
    Filling
    Cable

    Inox cable clamp A14/7402-003

    6 pcs
    Material
    Stainless steel AISI 316
    Surface finish
    Satined

    Dowel screw with metric-and wood thread, stainless steel, AISI304, M8x100 A-DIN 9210 M8x100-A2

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    100

    Hexagon thin nut with chamfer, stainless steel A-DIN 439B-A2 M8

    12 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    M
    8

    Plain washer, stainless steel, M8 A-DIN 9021-A2 M8

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    d
    8,4

    Nylon anchor GL PVC, d12, h60mm Q5/07-12 NYLON

    6 pcs
    Material
    Plastic/Nylon
    Use
    Anchoring
  • The complete set of aluminum profile elox-inox GS-AL/ZP-32x46/S-VA

    Material
    Aluminium
    Surface finish
    Satin-INOX
    Glass t
    10-12
    Required products
    €185,46
    without VAT
    €222,55 with VAT
    Very low stock (6 units)
    SET
    Alternatives
    Required products
    Part of set

    Set of the three-meter glazing profile AISI 304, K GS-304/ZP-32x46/S

    Material
    Stainless steel AISI 304/Aluminium
    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Satined
    Required products
    €185,46
    without VAT
    €222,55 with VAT
    Very low stock (3 units)
    SET

    Glazing firm - end cap. glass t = 10mm GS-304/ZP-Z02A-10/S

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    h
    46
    €7,29
    without VAT
    €8,75 with VAT
    Low stock (13 units)
    PCS

    Glazing firm - end cap. glass t = 12mm GS-304/ZP-Z02A-12/S

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    h
    46
    €7,29
    without VAT
    €8,75 with VAT
    In stock (25 units)
    PCS

    Fixed glazing - clamping profile L300cm GS/ZP-002

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    8-12

    Fixed glazing - clamping part GS/ZP-L02

    9 pcs
    Material
    Aluminium
    Surface finish
    Raw

    Cover profile al-inox GS/ZP-A02-ai

    2 pcs
    Material
    Aluminium
    Surface finish
    Satin-INOX
    L
    2950
  • The complete set of aluminum profile Elox, L=3000 GS-AL/ZP-32x46/N/E

    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    10-12
    Required products
    €172,70
    without VAT
    €207,24 with VAT
    Low stock (17 units)
    SET
    Alternatives
    Required products
    Part of set

    Glazing firm - end cap. glass t = 10mm GS-AL/ZP-Z02A-10/N/E

    Material
    Aluminium
    Surface finish
    Anodized
    h
    46
    €6,80
    without VAT
    €8,16 with VAT
    In stock (27 units)
    PCS

    Glazing firm - end cap. glass t = 12mm GS-AL/ZP-Z02A-12/N/E

    Material
    Aluminium
    Surface finish
    Anodized
    h
    46
    €0,00
    without VAT
    €0,00 with VAT
    Very low stock (8 units)
    PCS

    Glazing firm - end cap. glass t = 8mm GS-AL/ZP-Z02A-8/N/E

    Material
    Aluminium
    Surface finish
    Anodized
    h
    46
    Out of stock
    €4,66
    without VAT
    €5,59 with VAT
    Backordered
    PCS

    Fixed glazing - clamping profile L300cm GS/ZP-002

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    8-12

    Fixed glazing - clamping part GS/ZP-L02

    9 pcs
    Material
    Aluminium
    Surface finish
    Raw

    Cover profile AL-elox GS/ZP-A02-a

    2 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    L
    3000
  • Set of the three-meter glazing profile AISI 304, K GS-304/ZP-32x46/S

    Material
    Stainless steel AISI 304/Aluminium
    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Satined
    Required products
    €185,46
    without VAT
    €222,55 with VAT
    Very low stock (3 units)
    SET
    Alternatives
    Required products
    Part of set

    The complete set of aluminum profile elox-inox GS-AL/ZP-32x46/S-VA

    Material
    Aluminium
    Surface finish
    Satin-INOX
    Glass t
    10-12
    Required products
    €185,46
    without VAT
    €222,55 with VAT
    Very low stock (6 units)
    SET

    Glazing firm - end cap. glass t = 10mm GS-304/ZP-Z02A-10/S

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    h
    46
    €7,29
    without VAT
    €8,75 with VAT
    Low stock (13 units)
    PCS

    Glazing firm - end cap. glass t = 12mm GS-304/ZP-Z02A-12/S

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    h
    46
    €7,29
    without VAT
    €8,75 with VAT
    In stock (25 units)
    PCS

    Fixed glazing - clamping profile L300cm GS/ZP-002

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    8-12

    Cover profile AISI304 GS/ZP-A02-i

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    L
    3000

    Fixed glazing - clamping part GS/ZP-L02

    9 pcs
    Material
    Aluminium
    Surface finish
    Raw
  • The complete set of aluminum profile , L=3000 GS-AL/ZP-32x46/N/B

    Material
    Aluminium
    Surface finish
    Powder coating
    Glass t
    10-12
    Required products
    €164,61
    without VAT
    €197,53 with VAT
    Very low stock (4 units)
    SET
    Alternatives
    Required products
    Part of set
    glazing profile 3m-set with cover BLACK H50 glazing profile 3m-set with cover BLACK H50
    Sale

    glazing profile 3m-set with cover BLACK H50 GS-BLACK/ZP-30x50/N/B-U

    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    10
    Required products
    €111,35
    without VAT
    €133,62 with VAT
    In stock (167 units)
    SET

    Glazing firm - end cap. glass t = 10mm GS-AL/ZP-Z02A-10/N/B

    Material
    Aluminium
    Surface finish
    Powder coating
    Effect
    Black
    €6,21
    without VAT
    €7,45 with VAT
    Very low stock (6 units)
    PCS

    Glazing firm - end cap. glass t = 12mm GS-AL/ZP-Z02A-12/N/B

    Material
    Aluminium
    Surface finish
    Powder coating
    Effect
    Black
    Out of stock
    €6,21
    without VAT
    €7,45 with VAT
    Backordered
    PCS

    Glazing firm - end cap. glass t = 8mm GS-AL/ZP-Z02A-8/N/B

    Material
    Aluminium
    Surface finish
    Powder coating
    Effect
    Black
    Out of stock
    €6,21
    without VAT
    €7,45 with VAT
    Backordered
    PCS

    Fixed glazing - clamping part GS/ZP-L02

    9 pcs
    Material
    Aluminium
    Surface finish
    Raw

    Fixed glazing - clamping profile L300cm GS/ZP-002

    1 pcs
    Material
    Aluminium
    Surface finish
    Anodized
    Glass t
    8-12

    Cover profile AL- GS-AL/ZP-A02/N/B

    2 pcs
    Material
    Aluminium
    Surface finish
    Powder coating
    Effect
    Black
  • Electromagnetic lock with double-sided plate, 12-24V AC/DC B8/18-LC

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    D
    68
    €22,65
    without VAT
    €27,18 with VAT
    In stock (285 units)
    SET
    Part of set

    Electric strike lock, 12-24V AC/DC B1/18-LC

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized

    Double-sided strip for electric lock B8/18-FP

    1 pcs
    Material
    Stainless steel AISI 304
    Mark
    Rollkit
  • Lock set 80x40 with Electric lock B1/18 BR/80x40-set E

    Material
    Steel
    Surface finish
    Zn+Natural
    €76,31
    without VAT
    €91,57 with VAT
    Low stock (13 units)
    SET
    Alternatives
    Part of set

    Lock set 80x40 BR/80x40-set

    Material
    Steel
    Surface finish
    Zn+Natural
    €38,65
    without VAT
    €46,38 with VAT
    In stock (96 units)
    SET

    Stopper for electromag. lock universal 40x B1/61U-40

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized

    Lock box for lock B1/30-50A, JP80x40 B1/58J-80x40

    1 pcs
    Material
    Steel
    Surface finish
    Raw
    A
    80
    Required products

    Mortise lock Zn, 90x50mm B1/30-50A

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Axial distance
    90mm

    Door handle L145, d17mm, Zn D2/28-Zn

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    A
    145

    Double lock cylinder 27,5/27,5mm B1/19N

    1 pcs
    Material
    Brass
    Surface finish
    Nickel
    Effect
    Gray/Light gray

    Electric strike lock, 12-24V AC/DC B1/18-LC

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized

    Doorknob d60mm, D19mm, Zn D5/11-Zn

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    A
    56

    Square for door handle 8x8x87mm D0/05-Zn

    1 pcs
    Material
    Steel
    Surface finish
    Galvanized
    Shape
    Square rod
    Required products