Galvanized, adjustable steel hinge with weld-on nut, M16,

Galvanized adjustable steel hinge with weld-on nut M20, for gate frame 30 × 30 mm
Product code: D4/19-M20-30x30

The adjustable hinge with weld-on nut M20 is a practical solution for attaching the swing gate frame to its support structure. The weld-on nut is welded to the gate's support structure, while the gate frame made of 30 × 30 mm profile is attached to the hinge using a flange. After unscrewing the flange, the frame is placed onto the hinge, and then the flange is screwed back on. The threaded mechanism allows for adjusting the position of the gate leaf even after it has been installed. The hinge is made of structural steel with a galvanized surface finish. Parts intended for welding are supplied without surface treatment.

Material
Structural steel.

Surface finish
Galvanization. Parts intended for welding are without surface treatment.

Dimensions and technical parameters
Thread: M20
Intended for gate frame: 30 × 30 mm profile.

Installation and compatibility
The weld-on nut is welded to the gate's support structure. After unscrewing the flange, the gate frame made of 30 × 30 mm profile is placed onto the hinge, and then the flange is screwed back on. The threaded mechanism allows for adjusting the position of the gate leaf even after it has been installed. During installation, it is necessary to consider the gate's construction, the method of attaching the hinge to the support structure, and the correct screwing of the flange to the gate frame.

Advantages
Galvanized design for corrosion protection.
M20 threaded mechanism for gate position adjustment.
Weld-on nut for attachment to the gate's support structure.
Removable flange for attaching the gate frame.
Designed for gate frames with 30 × 30 mm profile.
Possibility of position adjustment even after gate installation.
Parts intended for welding without surface treatment.