Set for sliding gate up to 4m, Zn,D, 58x58mm

Galvanized bottom guide assembly with steel wheels and guide profile, 58 × 58 mm Product code: SV-60x60Zn-D clasic

The complete bottom guide assembly is designed for cantilever sliding gates with a passage width of up to 4 m and a leaf weight of up to 200 kg. It includes the bottom guide with support carriages with steel wheels and an innovative galvanized guide profile 58 × 58 mm with mounting holes. Thanks to the use of high-strength S350GD steel, the profile is significantly stiffer, withstands 40% greater load before deformation compared to standard S250 steel, and maintains a lower weight. The assembly ensures stable guiding, high durability, and smooth gate operation. For designing the travel system, use the Gate Sizing application.

Material and surface finish Structural high-strength steel S350GD and standard steel. The steel components, carriages, and guide profile are protected by a reinforced layer of double-sided hot-dip galvanizing (275 g/m2, +Z275MA) for maximum corrosion resistance outdoors. The wheels of the support carriages are made of high-quality steel.

Technical parameters – Product type: bottom guide assembly with guide profile 

Profile dimensions: 58 × 58 × 3 mm 

Profile length: 6 000 mm (6 m) 

 Maximum passage width: 4 000 mm (4 m) 

 Maximum gate leaf weight: 200 kg 

Profile material: high-strength steel S350GD 

Surface finish: reinforced hot-dip galvanizing (275 g/m2, +Z275MA) 

Profile design: with pre-drilled mounting holes

Assembly contents – 1 pc – bottom guide assembly including support carriages with steel wheels. – 1 pc – galvanized bottom guide profile with holes, S350GD steel, 58 × 58 × 3 mm, length 6 000 mm.

Installation and use The assembly serves a complete travel system for cantilever sliding gates at family houses and smaller buildings. The profile (58 × 58 mm) is easily screwed directly to the gate frame using the prepared holes. The support carriages are fixed to the foundation structure and, after correct alignment, guarantee stable and smooth movement. When selecting the assembly, the passage width and gate leaf weight must be considered. The Gate Sizing application is used to verify the suitability of components.

Advantages – High-strength steel S350GD: The profile is significantly stiffer and withstands 40% greater load before deformation compared to standard S250 steel. – Lower profile weight: Simplifies handling and lightens the gate structure while maintaining high load capacity. – Reinforced galvanizing layer: Double-sided galvanizing (275 g/m2, +Z275MA) provides above-standard protection against corrosion. – Durable steel wheels: Ensure high load capacity, maximum service life of the carriages, and reliable, smooth gate operation. – Fast installation: The guide profile includes mounting holes for immediate screwing to the frame without the need for drilling. – Complete solution: A matched set of profile and carriages designed precisely for gates up to 4 m and 200 kg.